| MJ3215B型1500mm木工自動跑車
MJ3215B 1500mm Woodworking Band Sawung Machine
MJ3215B 1500mm Woodworking Auto carriage
●主要性能與特點
本機床主要用于縱割原木。本機設計先進，采用機電儀一體化，結構合理，工藝精確，操作方便靈活，安全可靠，較大程度地減輕了工人的勞動強度。是各大、中型制材企業的加工設備，也是科技木生產企業前道工序的設備。傳動部分可選用地下拖動牽引裝置；也可采用調速電機，鏈條；鏈輪傳動裝置。
●Main function and features
This machine is main used to saw wood vertically.Placing machinery ,electricity and devices to the same machine in designing it,we can operate on it conveniently and nimbly,safely and reliably.It is high in accuracy of operation and good in benefit and can reduce labor intensity of workers and is a main equip-ment for all kinds of large and middle wood factory .It is also a necessary equipment of first progress for producing wood factories.Driving part can be used underground tow device,or adjust speed motor,drive by chain and sprocket.
|
鋸輪直徑和寬度
Diameter and width of saw wheel |
mm |
1500X200 |
|
鋸輪轉速
Rotating speed of saw wheel |
r/min |
520 |
|
兩鋸輪最大中心距
Max. centre distance between two saw wheels |
mm |
3000 |
|
最大可鋸木直徑
Max.diameter of saw-log |
mm |
1500 |
|
跑車可擱木最大直徑
Max.dia.For putting wood on carriage |
MJ3215B 1500mm |
Mm |
1500 |
|
MJ3218B 1800mm |
mm |
1800 |
|
最大鋸木長度 |
Mm |
8000 |
|
主電機功率 |
Kw |
55~75 | | 
南通茂溢機床有限公司> 木工帶鋸機自動跑車的特點介紹